42CrMo 42CrMo4/1.7225 Alloy Steel
SHUNBEI
10 TON
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Quantity: | |||||||||
42CrMo Steel is a medium-carbon alloy structural steel with good mechanical properties, good hardenability and a wide range of applications. | |||||||||
Product Description
12Cr1MoV Alloy Steel pipe application parameters:
Product Name | 42CrMo - SCM440 G41400 Alloy Steel Pipe |
Length | 6 meters;12 meters; As required. |
Diameter | Φ10-508mm, if you others, please contact us for more. |
Standard | GB,GOST,etc. |
Technique | Hot rolled (HR) Cold rolled(CR) Cast |
Main Grades | 10# 20# 35# 45# 50# 60# Q345B Q345C Q345D Q345E,Q235B Q235R Q355B ST12 ST37 ST52 DT4C 40cr T10 etc. |
MOQ | 1 ton. Sample order acceptable. |
Lead Time | Within 5-20days after receiving deposit. |
Export packing | Waterproof paper protected, steel strip packed stably, and fixed well.Standard Export Seaworthy Package. |
42CrMo Alloy Steel Chemical Composition:
Element | Composition (%) |
Carbon (C) | 0.38-0.45 |
Silicon (Si) | 0.17-0.37 |
Manganese (Mn) | 0.50-0.80 |
Phosphorus (P) | ≤0.035 |
Sulfur (S) | ≤0.035 |
Chromium (Cr) | 0.90-1.20 |
Nickel (Ni) | ≤0.30 |
Copper (Cu) | ≤0.30 |
Product Description
42CrMo steel is an ultra-high-strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low-temperature impact toughness. 42CrMo steel is suitable for manufacturing large and medium-sized plastic molds that require certain strength and toughness.
Application
42CrMo steel belongs to alloy structural steel in terms of material classification. It has good mechanical properties and machinability. It is widely used. There are mainly two types of materials, plates and round bars. Its comprehensive performance is better than 40cr, and it has been recognized by the industry. .non-corrosive Medium), etc.; it can also replace 40CrNi for the manufacture of high-load transmission shafts, turbine engine rotors, large-section gears, support shafts (diameter less than 500MM), etc.; process equipment materials, pipes, welding materials, etc.