 |
20CrMnTi Low carbon steel round bar
10 TON
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 20CrMnTi is a carburizing steel, which is often used to manufacture transmission gears in automobiles. Its main uses are: for shafts, piston parts, and various special parts of automobiles and aircrafts. | |||||||||
Product Description
20CrMnTi round bar application parameters:
Product Name | 20CrMnTi Alloy STEEL ROUND BAR |
Length | 3m,6m,9m,12m or as required |
OD | 20mm~650mm or as required |
Standard | AISI,ASTM,DIN,JIS,GB,EN,etc. ; Test Reports of Material & SGS Inspection Available |
Technique | Hot rolled (HR) or Cold rolled (CR) |
Thickness Tolerance | -0.05-0.07mm or 0.75-0.1mm or -1% |
MOQ | 1ton. Sample order acceptable. |
Lead Time | Within 5-20days after receiving deposit. If in large tons, pls contact us for confirmation. |
Export packing | Waterproof paper protected, steel strip packed stably, and fixed well. Standard Export Seaworthy Package. Suit for all kinds of transportation means; or as required |
20CrMnTi round bar Chemical Composition:
Element | Composition (%) |
Carbon (C) | 0.17-0.23 |
Silicon (Si) | 0.17-0.37 |
Manganese (Mn) | 0.80-1.10 |
Phosphorus (P) | ≤0.013 |
Sulfur (S) | ≤0.013 |
Chromium (Cr) | 1.00-1.30 |
Copper(Cu) | ≤0.09 |
Product Description
2CrMnTi is a good carburizing steel with high hardenability. After carburizing and quenching, it has a hard and wear-resistant surface and a tough core. It has high low temperature impact toughness, moderate weldability, and machinability after normalizing. good. It is used to manufacture important parts that bear high speed, medium or heavy load, impact and friction with a section less than 30mm, such as gears, ring gears, gear shafts, crossheads, etc. It is a substitute steel for 18CrMnTi, widely used as carburized parts, in the automobile and tractor industry, it is used for important carburized parts with a section below 30mm, bearing high speed, medium or heavy load, impact and friction, such as gears, shafts and ring gears , gear shafts, main shafts of sliding bearings, crossheads, claw clutches, worms, etc.
Application
Ordinary carbon structural steel has a wide range of applications. Generally used as building materials and less important mechanical parts, making screws, anchor screws, furnace parts, agricultural machinery, building structures, rolled into I-beams, channel steels, angle steels, steel plates, steel pipes and other various Profiles, manufacturing various parts, can also be heat treated.
