DX53D Hot Dip Galvanized Tube
SHUNBEI
Free samples(Contact Us)
10 TON
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Quantity: | |||||||||
Grade DX53D is a deep-drawing grade that meets high demands on formability and is particularly suitable for the production of difficult profiles with greater thicknesses. | |||||||||
Product Description
DX53D Hot Dip Galvanized Tube application parameters:
Product Name | DX53D Hot Dip Galvanized Tube |
Length | 6m or as required |
Outer Diameter | 20mm~220mm or as required |
Standard | AISI,ASTM,DIN,JIS,GB,EN,etc. ;Test Reports of Material & SGS Inspection Available |
Technique | Cold rolled (CR) |
Wall Thickness | 0.25-3.2MM |
Main Grades | DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, S220GD+Z, DX51D+Z/SGCC/A653, etc |
MOQ | 1 ton. Sample order acceptable. |
Lead Time | Within 5-20days after receiving deposit. If in large tons, please contact us for confirmation. |
Export packing | Waterproof paper protected, steel strip packed stably, and fixed well. Standard Export Seaworthy Package. Suit for all kinds of transportation means; or as required |
SGCC Chemical Composition:
Element | Composition (%) |
Carbon (C) | ≤0.12 |
Silicon (Si) | ≤0.50 |
Manganese (Mn) | ≤0.60 |
Phosphorus (P) | ≤0.10 |
Sulfur (S) | ≤0.045 |
Product Description
Galvanized steel tubes are coated with zinc to prevent oxidation and rust, which ultimately prevents deterioration. They are a good choice when you need to protect steel pipes from corrosion. The protective quality of galvanized pipe is produced by a hot dip process in which zinc provides a protective layer that will rust before any steel is affected. In terms of durability, galvanized steel pipes can last more than 100 years, depending on the amount of corrosion exposure.
Application
Hot Dipped Galvanized DX53D Steel Sheet can be divided into general use, roofing use, building exterior panel use, structural use, wall panel use, tensile and deep drawn galvanized steel sheet. The steel sheet is immersed in a bath of molten zinc so that its surface adheres to the zinc sheet. At present, the production mainly adopts continuous galvanizing process, that is, the steel plate is continuously immersed in a galvanized steel plate and melted in a galvanized steel plate. , Tin plate, lead plate, plastic composite steel plate.