ISO 34CrMo4 / ASTM 4135/UNS G41350 /1.7220
2000-10000 mm
600-2000mm
ISO 34CrMo4 / ASTM 4135/UNS G41350 /1.7220
FLAT
HR
Alloy steel
10 TON
Industrial
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
Quantity: | |||||||||
35CrMo alloy structural steel plate has high static strength, impact toughness and high fatigue limit, higher hardenability than 40Cr, high creep strength and endurance strength at high temperature, and long-term working temperature can reach 500℃; it has medium plasticity during cold deformation and poor weldability. It can be used at low temperature to -110 degrees Celsius, and has high static strength, impact toughness and high fatigue strength, good hardenability, no overheating tendency, small quenching deformation, acceptable plasticity during cold deformation, medium machinability, but has the first type of temper brittleness, poor weldability, and needs to be preheated to 150~400 degrees Celsius before welding, and heat treated after welding to eliminate stress. It is generally used after quenching and tempering, and can also be used after high and medium frequency surface quenching or quenching and low and medium temperature tempering. Delivery status: normalizing or normalizing + tempering, quenching and tempering. | |||||||||
Product Details
|
Product Description
ASTM 4135 alloy structural steel plate is used to manufacture important parts in various machines that withstand impact, bending and torsion, and high loads, such as rolling mill herringbone gears, crankshafts, hammer rods, connecting rods, fasteners, steam turbine engine main shafts, axles, engine transmission parts, large motor shafts, perforators in petroleum machinery, boiler bolts with working temperatures below 400 degrees Celsius, nuts below 510 degrees Celsius, high-pressure seamless thick-walled conduits in chemical machinery (temperature 450~500 degrees Celsius, no corrosive media), etc.; it can also replace 40CrNi to manufacture high-load transmission shafts, steam turbine engine rotors, large-section gears, support shafts (diameter less than 500MM), etc.; process equipment materials, pipes, welding materials, etc. It can also be used to manufacture standard parts such as groove pins.
Material | Alloy structural steel |
Length | 6000mm |
Standard | ISO 34CrMo4 / ASTM 4135/UNS G41350 /1.7220 |
Technique | Hot Rolled |
Thickness | 4mm |
Usage/Application | Industrial |
Country of Origin | Made in China |
|
Product Display
|
Application
MANUFACTURING INDUSTRIAL PARTS
ASTM 4135 alloy structural steel plate is used to manufacture important parts in various machines that withstand impact, bending, torsion and high loads, such as rolling mill herringbone gears, crankshafts, hammer rods, connecting rods, fasteners, steam turbine engine main shafts, axles, engine transmission parts, large motor shafts, perforators in petroleum machinery, boiler bolts with working temperatures below 400 degrees Celsius, nuts below 510 degrees Celsius, high-pressure seamless thick-walled conduits in chemical machinery (temperature 450~500 degrees Celsius, no corrosive media.
It can be used to manufacture high-load transmission shafts, turbine engine rotors, large-section gears, support shafts (less than 500MM in diameter), etc. It can also be used to manufacture standard parts such as groove pins.
Manufacture of oil and gas extraction equipment, such as drill pipes and wellhead tools. Its high strength and corrosion resistance enable the equipment to be used for a long time in harsh working environments.
|
ASTM 4135 Chemical element content (%)Element | C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
Minimum | 0.32 | 0.17 | 0.4 | - | 0.8 | - | - | 0.15 | |
Maximum | 0.4 | 0.37 | 0.7 | 0.035 | 0.035 | 1.1 | 0.3 | 0.3 | 0.25 |
Production Process
|
Product Packaging
Company Details
|
Company Profile
"foshan shunbei ronghang metal Steel Group Co., Ltd." is located in guangdong. A modern and high-quality enterprise integrating steel production, processing and sales. Since its establishment, the company has developed rapidly. The company specializes in the sale of seamless steel pipes, stainless steel pipes, galvanized coils, medium and thick plates, boiler plates,wear-resistant plates, weather-resistant plates, welded pipes, I-beams, H-beams, angle steels, channel steels, high-frequency welded H-beams, submerged arcs Welding H-shaped steel, etc. The annual design and marketing capacity is 30,000 to 60,000 tons, and the products are mainly used in machinery manufacturing, petrochemical, transportation, construction and other industries.
|
Certifications
FAQ
|
Product Description
Q1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q5:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q6:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q7.Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q8:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
Q9:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.